Polyester Solutions and Isocyanates
Lamcoat 17 -
heat reactivating laminating polyurethane
Lamcoat 32
- amorphous laminating copolyester
Lamcoat 35
- copolyester for metal priming
Lamcoat 80 -
solvent free linear polyester
Lamcoat 89
- amorphous laminating copolyester
Isobond 14
- reactive hot melt laminating
polyurethane
Isobond 27
- reactive hot melt adhesive polyurethane
DIISO 30 -
fast acting laminating polyisocyanate
DIISO 301
- optimised polyisocyanate blend
DIISO 31 -
IPDI based laminating polyisocyanate
DIISO 75BA
- HMDI based laminating polyisocyanate
Product Name
|
LAMCOAT 17
|
Form
|
Translucent Thick Liquid
|
Properties
|
A highly elastic adhesive solution, readily reactivated at moderate
temperatures ( 80c) and showing good adhesion to a wide range of
polymers and metals.
Does not show good compatibility with other polymer solutions and
is normally used alone.
|
Packaging
|
22.5 kg pails, 185 kg drums, 900 kg IBCs
|
Composition
|
Methyl ethyl ketone 75 - 80% w/w
Aromatic polyurethane 20 - 25% w/w
|
Physical Properties
|
|
Viscosity
|
5,000 - 6,000 cps @ 20° c
|
Reactivation Temperature
|
56 - 60° c
|
Tensile Strength
|
5,500 - 6,000 psi
|
Elongation at Break
|
550 - 600%
|
|
LOOK UP MSDS
|
Back to Top
Product Name
|
LAMCOAT
32/30
|
Form
|
Hazy Brown Thick Liquid
|
Properties
|
Amorphous polyester adhesive solution showing good adhesion to
a wide range of polymers and metals.
Excellent temperature stability when cross-linked
with Diiso 30 or Diiso 47
|
Packaging
|
22.5 kg pails, 185 kg drums, 900 kg IBCs
|
Composition
|
Methyl ethyl ketone 69 - 71% w/w
Amorphous copolyesters 29 - 31% w/w
|
Alternative Solvents
|
Methylene dichloride, glycol ethers, aromatics, esters
|
Physical Properties
|
|
Viscosity (soln)
|
Approx 2,000 cps @ 20° c
|
Glass Temperature (solid)
|
-4°c
|
Hydroxyl Value (as 100%)
|
3 - 5 mg KOH/g
|
Tensile Strength
|
<10 N/mm2
|
Flow temperature (dried)
|
95 - 120° c
|
|
LOOK
UP MSDS |
Back to Top
Product Name
|
LAMCOAT
35/30
|
Form
|
Hazy Brown Thick Liquid
|
Properties
|
Amorphous polyester adhesive solution showing good adhesion to
a wide range of polymers and metals.
Normally cross-linked with Diiso 30
|
Packaging
|
22.5 kg pails, 185 kg drums, 900 kg IBCs
|
Composition
|
Methyl ethyl ketone 69 - 71% w/w
Amorphous copolyesters 29 - 31% w/w
|
Alternative Solvents
|
Methylene dichloride, glycol ethers, aromatics, esters
|
Physical Properties
|
|
Viscosity (soln)
|
Approx 1,000 cps @ 20° c
|
Glass Temperature (solid)
|
-23° c
|
Hydroxyl value (as 100%)
|
5 - 7 mg KOH/g
|
Tensile Strength
|
5 N/mm2
|
Fluid temperature (dried)
|
60 - 70° c
|
|
LOOK
UP MSDS |
Back to Top
Product Name
|
LAMCOAT 80
|
Form
|
Clear Thick Liquid
|
Properties
|
Solvent free linear polyester showing good adhesion to a wide
range of polymers and metals and producing highly elastic laminates.
Must be cross-linked with Diiso N75.
|
Packaging
|
30 kg pails, 240 kg drums
|
Composition
|
Linear saturated copolyester 100% w/w
|
Compatible Solvents
|
Methylene dichloride, glycol ethers, aromatics, esters
|
Properties
|
|
Viscosity
|
Approx 13,000 cps @ 20° c, 11,000
cps @25° c
|
Acid Value
|
<3 mg KOH/g
|
Hydroxyl Value
|
60 - 70 mg KOH/g
|
Density
|
1.2 g/cm3
|
Light Stability
|
Good
|
Back to Top
Product Name
|
LAMCOAT 89/40
|
Form
|
Hazy Brown Thick Liquid
|
Properties
|
Amorphous polyester adhesive solution showing good adhesion to
a wide range of polymers and metals.
Best all round performance when cross-linked with Diiso 301
|
Packaging
|
23.5 kg pails, 192 kg drums, 960 kg IBCs
|
Composition
|
Methyl ethyl ketone 59 - 61% w/w
Amorphous copolyesters 39 - 41% w/w
|
Alternative Solvents
|
Methylene dichloride, glycol ethers, aromatics, esters
|
Properties
|
|
Viscosity (soln)
|
Approx 2,000 cps @ 20° c
|
Glass Temperature (solid)
|
-4° c
|
Hydroxyl Value
|
3 - 7 mg KOH/g
|
Tensile Strength
|
<10 N/mm2
|
Fluid temperature (dried)
|
110 - 130° c
|
|
LOOK AT MSDS
|
Back to Top
Isocyanate Name
|
ISOBOND
14
|
Monomer type
|
MDI (4,4' diphenylmethane diisocyanate)
|
Polyol type
|
Aromatic + linear blend
|
Available NCO % w/w
|
2 to 3
|
Free NCO % w/w
|
<0.5
|
Usage
|
Typically 3 to 12 gsm
|
Viscosity cps
|
8,000 @ 120° c
|
Vapour Pressure mbar
|
10 -6 @ 120°
c
|
Storage Conditions
|
Store in a dry place between 10 and 30 °
c
|
Back to Top
Isocyanate Name
|
ISOBOND
27
|
Monomer type
|
MDI (4,4' diphenylmethane diisocyanate)
|
Polyol type
|
Prmarily linear
|
Available NCO % w/w
|
2 to 3
|
Free NCO % w/w
|
<0.5
|
Usage
|
Typically 3 to 12 gsm; 1 to 5 g per linear metre
|
Viscosity cps
|
6,000 @ 120° c
|
Vapour Pressure mbar
|
10 -6 @ 120°
c
|
Storage Conditions
|
Store in a dry place between 10 and 30 °
c
|
Back to Top
Isocyanate Name
|
DIISO 30
|
Monomer type
|
MDI (4,4' diphenylmethane diisocyanate)
|
NCO % w/w
|
30 - 32
|
Usage
|
Typically 25 - 40% of dry weight of polyester
|
Viscosity cps
|
150 - 250 @ 20° c
|
Vapour Pressure mbar
|
10 -6 @ 20°
c, 10 -5 @ 25°
c, 10 -3 @ 40°
c
|
Storage Conditions
|
Store in a dry place between 10 and 30 °
c
|
Back to Top
Isocyanate Name
|
DIISO 31
|
Monomer type
|
IPDI (isophorone diisocyanate)
|
NCO % w/w
|
37 - 38
|
Usage
|
Typically 25 - 35% of dry weight of polyester
|
Viscosity cps
|
20 - 30 @ 20° c
|
Vapour Pressure mbar
|
10 -3 @ 20°
c
|
Storage Conditions
|
Store in a cool dry place
|
Back to Top
Isocyanate Name
|
DIISO 301
|
Monomer type
|
Blend
|
NCO % w/w
|
35 - 36
|
Usage
|
Typically 25 - 35% of dry weight of polyester
|
Viscosity cps
|
20 - 50 @ 20° c
|
Vapour Pressure mbar
|
10 -3 @ 20°
c
|
Storage Conditions
|
Store in a cool dry place
|
|
LOOK AT MSDS
|
Back to Top
Isocyanate Name
|
DIISO 75BA
|
Monomer type
|
HMDI (hexamethylene-1,6-diisocyanate)
|
Solvent
|
Butyl acetate (25%)
|
NCO % w/w
|
22 - 24
|
Usage
|
Typically 40 - 55% of dry weight of polyester
|
Viscosity cps
|
Typically 200 cps @ 20° c
|
Vapour Pressure mbar
|
10 -3 @ 20°
c, 10 -2 @ 25°
c
|
Storage Conditions
|
Store in a cool dry place
|
|
LOOK AT MSDS
|
Back to Top
|
|