Polyester / Polyurethane Laminating Resins

Solvent Based Laminating and Coating Resins

Lamcoat 17 - a heat reactivated polyurethane for bonding many polymers and metals where intermediate treatment is required before final assembly. Details

Lamcoat 32 - used with one of our range of polyisocyanates for bonding polyesters to metals. The cured bond has good resistance to high temperatures and moisture. Details

Lamcoat 35 - good priming and wetting properties. A general-purpose adhesive for bonding polyesters when cross-linked with a polyisocyanate. Details

Lamcoat 89 - a top all round performer with many uses.

Cross-linked with a polycyclic isocyanate for laminating a wide range of polymers and metals.

Used with linear polyisocyanates as a protective covercoat.

Widely used to bond inert fillers as part of decorative or primer inks.

This formulation demonstrates good priming properties for many metals and is often specified for high quality decorative or protective finishes. Details

Solvent Free Laminating and Coating Resins

Lamcoat 80 - solvent free linear polyester showing good adhesion to many polymers and metals. Frequently used for soft-feel cover coats and protective pots for cabling. Details

Reactive Hot-Melt Resins

Isobond 14 - a reactive hot melt specifically designed to laminate PVC. Bonds strongly to uPVC as well as many plasticised PVCs. Combines the instant grab of a hot melt with the ultimate strength of an isocyanate based 2-pack without the problems of solvents. The ideal solution to many high speed assembly needs. Details

Isobond 27 - a reactive hot melt based on linear polymer precursors. An excellent general purpose adhesive which bonds strongly to a wide range of flexible and rigid substrates. Combines the instant grab of a hot melt with the ultimate strength of an isocyanate based 2-pack without the disadvantages of solvent based systems. The ideal solution to many high speed assembly needs. Details

We are always willing to discuss the manufacture of tailored resins to suit you individual requirements. Please contact us to discuss your needs.

Non-Reactive Hot-Melt Resins

We supply a wide range of linear and crystalline polyester hot melts in bead and pellet form to fill the needs of many traditional applications.

Melt temperatures are in the range 50 to 180c with open times from 2 to 30 seconds.

Please contact us with details of your application.